Throttle check valves SDRVM
The throttle check valve SDRMV consists of adjustable throttle valves SDM and check valves RVM (size G1/4), which are integrated in a valve block. Depending on the closing direction of the check valve is a throtteling of the flow in one direction and a low-loss flow through the check valve in the other direction. Herewith it is possible to set the speed of the cylinder or motor into the requested direction. The throttle check valve is located between a seated valve and the cylinder or motor.
Operating pressure
|
up to 700 bar
|
Max. flow rate
|
25 l/Min
|
Porting
|
NG 4
|
Features
|
Advantages
|
---|
Manifold made of corrosion-free material
|
Bi-directional flow
|
Consists of a throttle valve SDM and a check valve RVM
|
Adjustable while under pressure
|
The valve setting can be locked by a counter nut
|
Very fine adjustment
|
- Hydraulic systems
- Clamping applications
- Mobile hydraulics
Hydraulic fluid
|
Mineral oil according to DIN 51524 (other fluids on request)
|
Fluid temperature range
|
-20 to 80 °C
|
Ambient temperature range
|
-30 to 50 °C
|
Viscosity range
|
5 to 420 mm²/s
|
Porting
|
NG 4
|
Max. operating pressure port 1
|
700 bar
|
Max. operating pressure port 2
|
700 bar
|
Max. flow rate
|
25 l/min
|
Pressure loss
|
at 12 l/min (fully open) and 32 mm²/s: 35 bar
at 25 l/min (fully open) and 32 mm²/s: 155 bar
|
Filtration (recommendation)
|
class 17/15/12 according to ISO/DIN 4406
|
Materials
|
Manifold: corrosion-free material
Cartridge body: hardened corrosion-free steel
Check valve housing: hardened corrosion-free steel
Supporting ring: PTSM
|